Clutch
by clicking the diagram the names will be clearly visible.
A clutch is a device that connects or separates a driving unit from the unit it drives. With two engines connected to a gearbox, a clutch enables one or both engines to be run and facilitates reversing of the engine. The hydraulic or fluid coupling uses oil to connect the driving section or impeller with the driven section or runner. No wear will thus take place between these two, and the clutch operates smoothly.
The runner and impeller have pockets that face each other which are filled with oil as they rotate. The engine-driven impeller provides kinetic energy to the oil which transmits the drive to the runner. Thrust bearings must be provided on either side of the coupling because of the axial thrust developed by this coupling.
A plate-type clutch consists of pressure plates and clutch plates arranged in a clutch spider A forward and an aft clutch assembly are provided, and an externally mounted selector valve assembly is the control device which hydraulically engages the desired clutch. The forward clutch assembly is made up of the input shaft and the forward clutch spider.
Must Read: Explanation About Gearboxes And Reversing
The input shaft includes the forward-driven gear and, at its extreme end, a hub with the steel pressure plates of the forward clutch assembly spline-connected, i.e. free to slide. Thus when
the input shaft turns, the forward-driven gear and the forward clutch pressure plates will rotate. The forward clutch plates are positioned between the pressure plates and are spline-connected to the forward clutch spider or housing.
This forward clutch spider forms part of the forward pinion assembly which surrounds but does not touch the input shaft. The construction of the reverse clutch spider is similar. Both the forward and reverse pinions are in constant mesh with the output gear wheel which rotates the output shaft. In the neutral position, the engine is rotating the input shaft and both driven gear wheels, but not the output shaft.
When the clutch selector valve is moved to the head position, a piston assembly moves the clutch plates and pressure plates into contact. A friction grip is created between the smooth pressure plate and the clutch plate linings and the forward pinion rotates. The forward pinion drives the output shaft and forward propulsion will occur. The procedure when the selector valve is moved to the astern position is similar but now the reverse pinion drives the output shaft in the opposite direction.
Post a Comment